|
IN THIS SECTION:
Main
Check for Toilet Leaks
Fix Indoor Faucet Leaks
Fix Outdoor Faucet Leaks
High-Efficiency Showerheads & Aerators
Reading Your Water Meter
Check for High/Low Water Pressure Problems
|
|
|
Steps to install the Showerhead |
|
Step 1
Using the wrench, unscrew the old showerhead by turning it left.
Step 2
Clean threads then apply Teflon tape or pipe joint compound for sealing.
Step 3
Screw on the new showerhead by turning it right.
Step 4
Check for leaks. |
| |
Steps to install the Aerator |
Step 1
Turn off water.
Step 2
Unscrew old aerators. Turn left to loosen. Note: If you have difficulty removing old aerator, you might need to use an adjustable wrench. If so, tape up your wrench before beginning so it won't damage the chrome.
Step 3
Clean threads on faucet. If calcium has built up on the threads, use vinegar to clean off the calcium.
Step 4
Install new aerator.
Step 5
Check for leaks |
Installing the Showerhead
Tools needed:
- Adjustable wrench
- Teflon tape or pipe joint compound
Installing the Aerator
Tools needed:
|
