San Antonio Water System

Source of Drinking Water

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.

Contaminants that may be present in source water include:

Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural, livestock operations, and wildlife. SAWS is required to sample 1 site in the Geronimo Forest distribution system for bacteria each month, and no E. coli positives were found in our drinking water in 2022.

Inorganic contaminants, such as salts and metals, which can be naturally occurring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.

Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses.

Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems.

Radioactive contaminants, which can be naturally occurring or be the result of oil and gas production and mining activities.

Where Do We Get Our Drinking Water?

The source of SAWS Geronimo Forest drinking water originated as groundwater from the Edwards Aquifer. The Texas Commission on Environmental Quality has completed an assessment of your source water, and the results indicate that some of our sources are susceptible to certain contaminants. The sampling requirements for your water system is based on this susceptibility and previous sample data. Any detections of these contaminants will be found in this Water Quality Report. For more information on source water assessments and protection efforts, please contact us.

The information contained in the assessment allows us to better focus our source water protection strategies. Some of this source water assessment information is available on Texas Drinking Water Watch.

All Drinking Water May Contain Contaminants

When drinking water meets federal standards, there may not be any health benefi ts to purchasing bottled water or point of use devices. Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the EPA’s Safe Drinking Water Hotline (800-426-4791).

Secondary Constituents

Many constituents (such as calcium, sodium, or iron), which are found in drinking water, can cause taste, color, and odor problems. The taste and odor constituents are called secondary constituents and are regulated by the State of Texas, not the EPA. These constituents are not causes for health concern. Therefore, secondaries are not required to be reported in this document, but they may affect the appearance and taste of your water. The secondary constituents results are available for this System on Texas Drinking Water Watch.

Health Information About Lead

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. San Antonio Water System is responsible for providing high quality drinking water but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by fl ushing your tap for 30 seconds to two minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline.

Special Notice

You may be more vulnerable than the general population to certain microbial contaminants, such as Cryptosporidium, in drinking water. Infants, some elderly or immuno-compromised such as those undergoing chemotherapy for cancer; those who have undergone organ transplants; those who are undergoing treatment with steroids; and people with HIV/AIDS or other immune system disorders can be particularly at risk from infections. You should seek advice about drinking water from your physician or health care provider. Additional guidelines on appropriate means to lessen the risk of infection by Cryptosporidium are available from the Safe Drinking Water Hotline at 800-426-4791.

Violations

SAWS Geronimo Forest received no violations in 2022.

How To Read Your Water Quality Report

Lead and Copper
Monitoring Done at Customers’ Taps

Parameter/ Substance	Date Sampled	MCLG	AL	90th Percentile	Number of Sites Over AL	Units	Violation	Likely Source of Contamination
Copper	2020	1.3	1.3	0.138	0	ppm	No	Corrosion of household plumbing systems; erosion of natural deposits; leaching from wood preservatives
Lead	2020	0	15	2.48	0	ppb	No	Corrosion of household plumbing systems; erosion of natural deposits

Disinfectants and Disinfection By-products
Monitored in the Distribution System

Parameter/ Substance	Collection Date	Highest Locational Running Annual Average	Concentration Range Found	MCLG	MCL	Units	Violation	Likely Source of Contamination
Total Trihalomethanes* (TTHMs)	2022	4	3.8 – 3.8	NA	80	ppb	No	By-product of drinking water disinfection

*The value in the Highest Locational Running Annual Average column is the highest average of all TTHM and HAA5 sample results collected at a location over a year.

Inorganic Contaminants
Monitored at the Water Plants

Parameter/ Substance	Collection Date	Highest Level Detected	Concentration Range Found	MCLG	MCL	Units	Violation	Likely Source of Contamination
Barium	2022	0.0294	0.0294 – 0.0294	2	2	ppm	No	Discharge from drilling wastes; discharge from metal refineries; erosion of natural deposits
Fluoride	2021	0.24	0.24 – 0.24	4	4	ppm	No	Erosion of natural deposits; water additive which promotes strong teeth; discharge from fertilizer and aluminum plants
Nitrate (measured as Nitrogen)	2022	1.22	1.22 – 1.22	10	10	ppm	No	Runoff from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits
Selenium	2022	3	3 – 3	50	50	pp	No	Discharge from petroleum and metal refi neries; erosion of natural deposits from mines

Residual Disinfectant Level
Monitored in the Distribution System

Parameter/ Substance	Year	Average Level	Range of Levels Detected	MRDL	MRDLG	Units	Violation	Likely Source of Contamination
Chlorine Residual, Free	2022	1.54	0.6 – 2.19	4	4	ppm	No	Water additive used to control microbes

Definitions

The preceding tables contain scientific terms and measures, some of which may require explanation.

AL (Action Level) – The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.
ALG (Action Level Goal) – The level of a contaminant in drinking water below which there is no known or expected risk to health. ALGs allow for a margin of safety.
Avg (Average) – Regulatory compliance with some MCLs are based on a running annual average of monthly samples.
Level 1 Assessment – A study of the water system to identify potential problems and determine (if possible) why total coliform bacteria have been found in our water system.
Level 2 Assessment – A very detailed study of the water system to identify potential problems and determine (if possible) why an E. coli MCL violation has occurred and/or why total coliform bacteria have been found in our water system on multiple occasions.
MCL (Maximum Contaminant Level) – The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.
MCLG (Maximum Contaminant Level Goal) – The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.
MFL– Million fibers per liter (a measure of asbestos)
MRDL (Maximum Residual Disinfectant Level) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.
MRDLG (Maximum Residual Disinfectant Level Goal) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.
mrem – Millirems per year (a measure of radiation absorbed by the body)
NA – Not applicable
ND – Not detected
NTU – Nephelometric turbidity units (a measure of turbidity)
pCi/L – Picocuries per liter (a measure of radioactivity)
ppb – Parts per billion or micograms per liter (μg/L) or one ounce in 7,350,000 gallons of water
ppm – Parts per million or milligrams per liter (mg/L) or one ounce in 7,350 gallons of water
ppq – Parts per quadrillion or picograms per liter (pg/L)
ppt – Parts per trillion or nanograms per liter (ng/L)
TT (Treatment Technique) – A required process intended to reduce the level of a contaminant in drinking water
μmhos/cm – Micromhos per centimeter (a measure of conductivity)

State Water Loss Audit

In the water loss audit submitted to the Texas Water Development Board for the period of January through December 2022, San Antonio Water System (all San Antonio Water System PWSs) lost an estimated combined total of 20,041,180,829 gallons of water through main breaks, leaks, inaccurate customer metering, theft and other causes.